blog

The anticipation is over—your carefully chosen companion has finally arrived. The unboxing process is an exciting moment, but handling a lifelike doll requires some know-how to avoid accidental damage.

This guide will walk you through everything you need to know, from opening the box to preparing your doll for your first encounter.

Before You Begin: Prepare Your Space

• Clear, Soft Area: Choose a clean, open space on a soft surface like a bed, large sofa, or a carpeted floor. This provides a safe landing spot in case the doll slips.

• Gather Your Tools: Have a pair of sturdy scissors or a box cutter ready, along with the included repair kit (if any) and a clean towel.

• Wash Your Hands: Ensure your hands are clean and free of sharp jewelry or rough edges that could snag the material.

Step-by-Step Unboxing Guide

Step 1: Carefully Open the Outer Box
Most dolls ship in a nondescript outer cardboard box. Cut the tape carefully and avoid using excessive force that could slip and puncture the inner packaging.

Step 2: Locate the Inner Packaging
Inside, you'll find the doll securely nestled in white foam or held in place with straps. Do not pull the doll out by her limbs or head. The foam is designed to cushion her during transit.

Step 3: The Correct Way to Remove Your Doll

• This is a two-person job if possible. If you're alone, take your time.

• Gently remove the top layer of foam.

• Slide one arm under her back and the other under her knees, just as you would carry a person.

• Lift her out of the foam in a smooth, horizontal motion.

Step 4: Initial Inspection and "Waking Up"

• Once she's safely on your prepared soft surface, carefully inspect her for any transit-related damage.

• You may notice factory folds or a slight "new doll" smell—this is normal. Her body may also be cool to the touch.

• Allow her to acclimate to room temperature for a few hours. This makes the TPE or silicone more pliable and realistic.

Post-Unboxing: Setup and First Use

1. Pose Her Gently: Her articulated skeleton is stiff from being in a fixed position. Move her joints slowly and deliberately. Never force a limb beyond its natural range of motion.

2. Attach the Head: If the head was shipped separately, locate the neck bolt and carefully screw it into the corresponding hole on the body. Hand-tighten only—do not overtighten.

3. Initial Cleaning: Before your first intimate experience, it's a good practice to give your doll a gentle surface clean with a damp cloth and mild soap to remove any residual factory dust.

4. Powdering: After cleaning and drying, a light dusting of cornstarch or renewal powder will restore her soft, skin-like texture and reduce any initial tackiness.

Common First-Time Mistakes to Avoid

• Rushing the Process: Hurrying can lead to tears or joint damage.

• Using Sharp Objects Near the Doll: Be extremely careful with the box cutter and scissors.

• Forcing the Pose: Let the skeleton guide you; don't fight against it.

• Skipping the Cleaning: Always clean your doll before the first use for optimal hygiene.

Taking the time to unbox and set up your doll correctly ensures she remains in perfect condition, ready to provide years of companionship. For all the essential care products, from cleaning kits to storage solutions, visit the Accessories section at SexDollsHub.